 |
BRD05-PD132
- Single channel loop detector
- Detect presence of vehicle. Is used to confirm that
- the vehicle have completely passed through before
- the aluminum arm fall down to closing position.
- Power input is AC230.
|
Description:
Detect presence of vehicle. Is used to confirm that the vehicle have completely passed through before the aluminum arm fall down to closing position
Specification:
|
Description
|
Parameter |
|
Operating voltage
|
220V AC
|
|
Power Consumption
|
5VA
|
|
Frequency range
|
20 kHz to 170 kHz
|
|
Reaction Time
|
10ms
|
|
Sensitivity
|
adjustable in 8 increments
|
|
Operating temperature
|
-20°C to +65°C
|
|
Dimensions (include sockets)
|
78x40x108 mm (LxWxH)
|
|
Wiring
|
50µH to 1000µH. Ideal is 100µH to 300µH
|
| Signal holding time |
Unlimited/limited when loop is permanently covered 10 minutes
|
| Loop connection wiring |
Maximum length 20 meters, twisted at least 20 times per meter |
| Autocorrecting time |
1 to seconds |
| Net Weight ( include socket) |
265g |
| Storage temperature |
-40°C to +85°C |
|
Barrier Gate